Full Color Decals and Stickers

1.) I have found a FULL COLOR design I like but it is not the pattern I want.  How do I order?

If the design is already listed as a FULL COLOR decal but you want a different pattern then order using that form.  Even though you don't want that pattern this will still be the most simple way to order.

1. The number one thing you do will be to pick the size.  This is the width measured left to right as shown in the image.
2. Next you will need to choose the type of vinyl you want the decal to be printed on.  Be sure to understand what type of vinyl you need by going to the printed vinyl material page.  There is important information on that page so choose wisely (example: clear has VERY limited color options for ink).
3. You may choose to the Reverse the design if desired.  Do NOT choose this option if the design has lettering or numbers within it as this is not available for prints (you would need a mirror to read them).
4. This is the MOST IMPORTANT step when changing patterns on a design.  In the comments box state clearly (but in simple terms) how you want the decal to look.  You will need to first go to the printed decal colors page and pick out the pattern and/or color(s) you want used.  Simply state the COMPLETE pattern/color name in the comments box.  Most pattern examples have a header name (example: Aluminum Fiber) and then a color or pattern name (example:Charcoal).  So in this example here you would put in the comments box "change color to Charcoal Aluminum Fiber".   If an outline is desired then note that too and the color you want the outline. 

Be sure to check your email within 24 hours after you place the order in case any questions do arise.

2.) I have found a PATTERN  I like but it is not shown on the design I want.  How do I order?

There are literally millions of color/pattern combinations you can make for each decal.  Following the directions below will make this as trouble fee as possible. When you order a printed decal the process is different than ordering a single color (or two color) die-cut decal.  Read CAREFULLY!

• Go to the order form that shows the DESIGN you want (NOT the pattern).  This will probably be a black and white image.
• The first thing you do will be to pick the size.  This is the width measured left to right as shown in the image.
• Next you will need to choose the type of vinyl you want the decal to be printed on.  The choices are at the BOTTOM of the color list in the second pull-down menu.  You MUST choose CUSTOM FILL as your color choice if you want a printed pattern decal.  Be sure to understand what type of vinyl you need by going to the printed vinyl material page.  There is important information on that page so choose wisely (example: clear has VERY limited color options for ink).
• You may choose to the Reverse the design if desired.  Do NOT choose this option if the design has lettering or numbers within it as this is not available for prints (you would need a mirror to read them).
• You will need to skip the "Second Color Options" (steps 4 and 5 on the product page).  Skip these even if you do want an outline.  Choosing these options will just add cost to your decal that is not required.  So just leave both steps 4 and 5 "normal as shown".
• This is the MOST IMPORTANT step in ordering a full color design.  In the comments box state clearly (but in simple terms) how you want the decal to look.  You will need to first go to the printed decal colors page and pick out the pattern and/or color(s) you want used.  Simply state the COMPLETE pattern/color name in the comments box.  If an outline is desired then note that too and the color you want the outline.  Several examples are listed below to show how you comments should be worded.

Be sure to check your email within 24 hours after you place the order in case any questions do arise.